Porsche introduced the 911 Targa at the International Motor Show in Frankfurt in September 1965. The Targa is neither a cabriolet nor a coupé, neither a hard top nor a saloon, but something completely new: the first safety cabriolet in the world with a fixed safety or roll bar. Driving in the open air can now be enjoyed like never before in open-top cars in a variety of different ways thanks to a removable folding roof and a fold-down plastic rear window: completely closed, fully open or just with the centre roof section removed or the rear window folded down. The Targa concept was the starting signal for a totally different kind of Porsche driving experience and would be featured not only in all future 911 generations, but also subsequently in other cars, such as the 914 or the Carrera GT.
Named after the Targa Florio
With the new concept, Porsche was responding to increased safety requirements for open-top cars in the American market, countering voices calling for cabriolets to be completely banned in the United States. When deciding on a name for the model, consideration was given to race tracks where Porsche has been particularly successful, quickly leading to Targa Florio – the road race in Sicily where Porsche has enjoyed great motorsport success since the mid 1950s. For a short while, “911 Flori” was under discussion, until Head of Domestic Sales Harald Wagner stumbled on the answer by asking the question: “Why don‘t we just call it Targa?” The Italian term also means “number plate”, but legend has it that this only came to light when the copywriters were working on the sales brochure. In August 1965, Porsche applied for a patent for the Targa concept and from autumn 1966 the Targa supplemented the Coupé for the 911, 911 S and 912 with resounding success. From the late summer of 1967, the Targa models could also be optionally ordered with a fixed and heated rear window made of safety glass in place of the fold-down plastic rear window. A solution that became standard equipment just a year later and which remained a feature of the targa more or less unchanged until 1993.
A range of Targa options for the G series models
The Targa also remained a fixture of the product range for the second 911 generation, the G series models built from the late summer of 1973. For the first time, the 911 body was sustainably modified, now featuring new box-shaped bumpers with black bellows on the side, in line with new legislation in the United States. They were able to absorb impacts up to speeds of 8 km/h without any damage to the body. No changes were made to the technical Targa roof design. The visual appearance was modified, however, with the previous durable brushed stainless steel Targa roll bar now also available in black. Even when the 911 SC cabrio was included in the range in January 1983, once again a Porsche that could be driven with a fully open top, the targa remained a fixed constant – even beyond the end of G series production in 1989.
Type 964 with 85 percent new parts, but the Targa remains a classic
As early as the autumn of 1988, Porsche introduced the first all-wheel drive 911 with the 911 Carrera 4 Type 964, making it the third generation of the iconic sports car from Zuffenhausen. Porsche retained the classic body shape of the 911, but underneath about 85 percent of all the parts were new. Just a year later, a variant with classic rear-wheel drive was also available in the form of the 911 Carrera 2, but all three body types could also be ordered: Coupé, Cabriolet and Targa. The 911 Carrera 2 Targa and 911 Carrera 4 Targa, built until 1993, still had the classic Targa roll bar and the removable roof centre section. A total of 87,663 Targa models were built within the first three 911 generations.
Departure from the Targa roll bar – glass roof for the 911 Targa Type 993
The fourth generation of the 911 Type 993 was introduced in autumn 1993 in combination with a new body design, with the development of a new Targa concept from November 1995. For the first time in the 911, the front wings were wider and significantly flatter. The rear wings were also wider and ran in a straighter line to the rear. As well as extensive enhancements to the engine and chassis, generation 993 took the Targa idea in a completely different direction, without the Targa roll bar. The roof, made of tinted heat-insulating glass, running from the front window frame to the rear, was now encased within a longitudinal safety structure. Divided into electrical moving segments, it opened smoothly at the push of a button and retracted behind the rear window like a wide sliding roof. The main benefits of the new solution included reduced wind noise with a sun-drenched interior when the roof was closed. A continuing characteristic of this Targa: the tapered rear windows. The new Targa concept of the 993 series combined open-top driving pleasure with the 911 for the first time, without fundamentally changing the classic coupé roofline.
911 Targa Type 996 – a new rear lid for the Targa
Porsche presented the fifth 911 generation with the 911 Carrera Type 996 in 1997. It was completely redesigned and relied on water-cooled six-cylinder boxer engines for the first time. The Targa was available from December 2001 alongside the Coupé and Cabriolet. Just like its predecessor, the 911 Targa had an electrically operated glass roof, now with a surface area of more than 1.5 square metres. There had never before been that much glass surface area in a Porsche 911. The new Targa was also the first 911 to provide a rear window that could be folded up. This made it easy to access the rear storage compartment with up to 230 litres storage space to load suitcases, bags or other luggage.
911 Targa 4/4S Type 997 – lighter glass and two variants for the first time
September 2006 saw the introduction of the 911 Targa belonging to the now sixth 911 generation, type 997. In principle, it had the same Targa roof design as its predecessor, but with an additional practical rear lid. However, the use of special glass made it possible to reduce the weight by 1.9 kg, and two high-gloss polished aluminium strips along the edges of the roof were especially eye-catching. In addition, the 911 Targa was now only available in the two all-wheel drive variants – the 911 Targa 4 and the 911 Targa 4S.
911 Targa Type 991 – the return of the legendary Targa roll bar
In September 2011, Porsche introduced the seventh and fully redesigned 911 generation. Following the coupé and cabriolet body variants, the 911 Targa was presented in January 2014, cast as a modern classic with its innovative Targa roof. The classic Targa idea was successfully combined with state-of-the-art roof convenience for the first time. Just like the legendary original Targa, the new model had the characteristic wide bar in place of B-pillars, a moving roof section above the front seats, and a wrap-around rear window without a C-pillar. But unlike the classic models, the roof was opened and closed in the new Targa at the push of a button. The fully automatic roof system spectacularly hid the hardtop element behind the rear seat system. The new 911 Targa represented a high-end, innovative new edition of the 1965 classic.
911 Targa generations 1967–2019
(The production figures 911 total are including Targa)
|generation||production period||911 total||911 Targa|